Sand and Gravel Calculations

Acreage (Square Feet)

1 Acre:    43,560   1/4 acre = 10,890

1/2 Acre: 21,780   1/5 acre = 8,712

1/3 Acre: 14,520   1/6 acre = 7,260

Pasadena Mulch Quantity Estimators

To help plan for the landscaping portion of your construction project, we also have a Landscaping Quantity Estimators to help with your Mulch, Grass, Flower and Garden soils.

Loads

Read this before using this load quantity estimator
Typeover Any cell value
Tons / Yard (Conversion Factor)

Leave blank if you don't know.
# of Yards
or # of Tons
A Full Truck load in Yards
A Full Truck load in Tons
Full Loads Result loads Residual Amount
Yds or Tons

VOLUME

`
Enter your area if you know it (sq ft)

(Keep this blank to use calculated Area)
Check Box if area is Circular
Length (Feet)If inches
Width (Feet) If inches
Depth (Inches)  
If Feet  
Calculated Area (Square Feet)
Volume (Cubic Yards)
% Compaction (Optional)
Compacted Volume (Cubic Yards)
Perimeter (Feet)*
(Note:For rectangular or circular tree bed liner)

To subtract circular pipe to be buried in rectangular ditch:

1) Select circular area, 2) Enter pipe diameter (feet)

3) Check box for Depth (Depth in left hand column) in feet,

4) Enter length of pipe (feet) in that Depth entry box.

5) Subtract the resulting pipe volume from ditch volume.

Note: If using compaction, use compacted volume for both.

Quantity

Read this before using this quantity estimator
Typeover Any cell value
Tons / Yard (Conversion Factor)

Leave blank if you don't know.
A Full Truck load in Yards
or A Full Truck load in Tons
Full Loads
Residual Amount (Yards)
Residual Amount (Tons)
# Of Yards
# of Tons

COVERAGE

Cubic Yards
Depth (Inches)  
If Feet  
Calculated Area (Square Feet)

USER OF 'SAND AND GRAVEL CALCULATIONS' ON THIS WEB PAGE IS RESPONSIBLE FOR VERIFICATION OF RESULTS AND PROPER INPUTS


CULVERT

Tons / Yard (Conversion Factor)

Leave blank if you don't know.
Enter Empty Ditch Volume
Cubic Yards

Tons
Enter Culvert Volume
Cubic Yards

Tons
Difference (Ditch less Culvert)

To subtract culvert to be buried in rectangular ditch…
Use VOLUME calculator to calculate values to input above.
Note: If using compaction, use compacted volume for both.
If Circular Culvert:
1) Check box for Circular Area, 2) Enter culvert diameter (feet)
3) Check box for Depth (Depth in left hand column) in feet,
4) Enter length of culvert (feet) in that Depth entry box.
5) Subtract the resulting culvert volume from ditch volume.
Verify that this is correct for your projects’ application.
If Rectangular Culvert: 1) keep circular area unchecked.
2) Enter height of culvert for Length and enter culvert Width
Perform steps 3), 4) and 5) as you would for circular culvert.
Verify that this is correct for your projects’ application.

*Perimeter calculated with user input Length and Width or Diameter